Wrangler Flares

Wrenchin' with IZook
with Miles D. Oliver

YJ Wrangler Flares on a Suzuki

The Suzuki I drive is a 1992 model. In 1990 Suzuki switched to an all metal fender. The previous models had simple and much more flexible (and forgiving) plastic fenders. The fenders on my Suzuki were rough, dented, full of body putty and repairs by the previous owner were slapped together.

I added my share of 'trail dings' and it was time to replace them. I could buy new fenders from the Dealer, Purchase a set of costly aftermarket flares and hope that they would fit my year, Hit the junkyards, or go with a cheaper and easier alternative.

The dealer laughed at me when I asked about new replacements and roaming the junkyards looking for a set of metal flares was going to be about as easy as finding an honest politician. I didn't have the $300.00 for a set of aftermarkets and had heard that a set of rear flares from a Jeep Wrangler could be made to fit. To me this was sounding like a solution. They were cheap, easily replaced, and would flex instead of 'wrinkle' like my original flares.

I started off at the rear, removing what was left of my right rear fender, Since the fender was trash and wasn't worth saving I just went ahead and used the grinder and cutting wheel and got it off the best way I could. The mount for the fender is held on with spot welds. I didn't have a spot weld drill bit, I didn't want to drill holes totally through so I 'faced' the spot welds with a grinder and they just 'popped' out. I'm glad that I was able to get it off too as rust was starting to take hold.

The flexible fenders had an inside lip that I cut off with a utility knife. Once this was done the fender laid up nicely for adjustment. I taped it to the side and marked the holes to predrilled. I used sheetmetal screws with fender washers to hold it properly to the side. Because of the shape of the fender differing from the standard flare the holes will protrude into the cargo bay. This is of little consequence because I cut pieces of trimbrite (Aluminum Diamond Plate) for replacements of the original inside panels. I'll have a write-up of this soon as well.

The rest of the flares went on easily using the same process. The front fenders required cutting and sizing at the front to fit the contours of the steel body

NOTE: Disclaimer: The fabrication and modifications and designs you see here
have been done by myself (some with help), for myself, Miles D. Oliver. I
hold no Mechanical, structural, or Engineering degrees. If you duplicate these
modifications you do so at your own risk. I do not endorse or make any
claims to their safety, performance, On-road or off-road worthiness.

09/15/04 14:51

Looking for more exposure at your web site? We are looking for contributing authors. Any article you provide will be linked back to your site from the iZook web site with a full size banner at the top of your article. This site can only stay cutting edge with your input. E - mail me for details. You can link to iZook with a new link button. Make sure to let us know if you use this button so a return link can be posted on the iZook links page.

Select this link for the Table Of Contents

Email Editor in Chief

iZook.com is Trademarked 1998-2007, iZook. All rights reserved. This site is protected under copyright laws. Please do not use the iZook.com name or reprint any articles from this site without written permission. Copyright © 1998-2007, iZook. All rights reserved.

Disclaimer: The fabrication, modifications and designs you see on this web site are completed by our readers and submitted to us for publishing. If you duplicate these modifications you do so at your own risk. We do not endorse or make any claims to their safety, performance, On-road or off-road worthiness except as noted in our "Product Reviews". These reviews are on items purchased from or provided by reputable aftermarket suppliers. Please see our legal information page for details. Suzuki, Samurai, Sidekick, Vitara, Grand Vitara, X-90, and the Suzuki "S" Logo are all registered trademarks of American Suzuki Motor Corporation. Geo, Chevy, and Tracker are all registered trademarks of General Motors Corporation. iZook is in no way endorsed by or affiliated with American Suzuki Motor Corporation.