Tuffy® Console

Home Up

Click Here To Visit
Click Here To Visit

Up
RockBiters
Sound
On Board Air
PW Fenders
PW Fenders
DIY 2"bodylift
PW Dash
Towing Hookup
Bedliner
Heater Refresh
Calmini Rockers
Decal
DaveSport
Got Zuk Straps
Skid Plate
Heater Cleaning
Hood Swap
Wrangler Flares
Hood Latch
Mirror Install
NCO Rockers
Polyshield
Rag Joint
Rear Belts
IPF Head Lamps
Samurai Storage
SW Tank Skid
Petroworks Cage
Door Straps
TT Cage
Fender Flare
Tuffy® Console
Virtual Lift
ZDoor Strap
Wrenchin' with IZook
with Bill Johnston

Tuffy® Samurai Security Console Installation


Tuffy® Samurai Security Console

The Samurai Security ConsoleI like to be able to park anywhere and be sure that my valuables are safely locked away in the rig. My convertible Samurai has a canvas top and a plastic glove box that a good Buck knife could open in a heartbeat... See a problem?

Tuffy® Security Products debuted their Samurai Security Console in Moab earlier this year making us all run for our checkbooks! It was a perfect fit for an installation between the stock seats... oops...

 Many of us had already replaced our stock seats with the popular (wider) racing seats that you see in many of the vehicles at IZook and in print magazines. This posed a problem. Tuffy® listened to our need and responded with a security console identical in just about every way - except skinnier! This console measures a scant 5.125" across and fits easily between the larger seats. The heavy duty padded armrest, pry-proof door and dual cup holder with choice of two mounting positions are the same as in the original unit. 

Click for a larger view...Click for a larger view...Although the console has been redesigned with the larger seats in mind it doesn't mean that you are out of luck if you still have comfortable stockers. As you can see on the right, it fits nicely there too!

Click for a larger view...Click for a larger view...You can see the mounting holes that allow you to secure this unit to the floor in the picture to the left. You can also see the removable 'storage cup' that can be used for keys, change or just about anything else that you don't want lost in the bottom of the unit. No matter how much we clean out the car, there is always 'important stuff' that ends up getting stashed in the console so you don't lose track of it. Now that wheel lock socket won't get lost in the shuffle! The key lock is shown on the right. This is not your common 'everybody's gas cap key fits it' kind of lock. It is a heavy duty cylindrical lock and it comes with two keys. Store one in a safe place (not inside the unit...) because if you lose the other you will have a nice armrest and nothing more. Remember this is called a Security Console...

Click for a larger view...Click for a larger view...The console comes with neoprene weatherproofing strips that will make the unit more water resistant. Following the directions that come with the console will lead you through short, step by step instructions that describe exactly where to put the strips. The photo on the left shows my eight year old daughter helping with the cutting and placement chores. Pardon the cliché, but 'even a child can do it'! This also gives the door a solid feel when shutting and locking the unit.

Click for a larger view...To the left you can see the final seal being applied. You can also see the unique locking mechanism. With the door shut and locked, it makes the lid virtually pry-proof. If a thief really wanted to get into the console, any lock would only serve to slow him down, but this lock would make him revert to using a torch because there is no easy way to get in with a pry bar.

Click for a larger view...Click for a larger view...Here you can see the two mounting positions for the dual cup holder. In front it sits right next to the emergency brake, in back the drinks sit side by side across the rear of the unit. You also have the option to purchase a second dual cup holder if you are really thirsty, or have kids in the optional Suzuki backseat. 

Click for a larger view...Click for a larger view...Here you see the dual cup holders mounted to the front of the console. These cup holders can handle anything from a one liter cola bottle to your favorite 'koozy' filled with your choice of beverage. They are also of a steel construction so they are just as 'tuff' as the console itself. 

Click for the next page...

09/15/04 14:52

Looking for more exposure at your web site? We are  looking for contributing authors. Any article you provide will  be linked back to your site from the iZook web site with a full size banner at the top of your article.  This site  can only stay cutting edge with your input. E - mail me for details.  You can link to iZook with a new link button. Make sure to let us know if you use this button so a return link can be posted on the iZook links page.

Select this link for the Table Of Contents

Email Editor in Chief  Email Me!

iZook.com is Trademarked 1998-2007, iZook. All rights reserved.  This site is protected under copyright laws. Please do not use the iZook.com name or reprint any articles from this site without written permission. Copyright © 1998-2007, iZook. All rights reserved. 

Disclaimer: The fabrication, modifications and designs you see on this web site are completed by our readers and submitted to us for publishing.  If you duplicate these modifications you do so at your own risk. We do not endorse or make any claims to their safety, performance, On-road or off-road worthiness except as noted in our "Product Reviews". These reviews are on items purchased from or provided by reputable aftermarket suppliers.   Please see our legal information page for details. Suzuki, Samurai, Sidekick, Vitara, Grand Vitara, X-90, and the Suzuki "S" Logo are all registered trademarks of American Suzuki Motor Corporation. Geo, Chevy, and Tracker are all registered trademarks of General Motors Corporation. iZook is in no way endorsed by or affiliated with American Suzuki Motor Corporation.