Rock Block

Looking for more exposure at your web site? We are looking for contributing authors. Any article you provide will be linked back to your site from the iZook web site with a full size banner at the top of your article. This site can only stay cutting edge with your input. E - mail me for details. You can link to iZook with a new link button. Make sure to let us know if you use this button so a return link can be posted on the iZook links page.

Select this link for the Table Of Contents

Email Editor in Chief

iZook.com is Trademarked 1998-2007, iZook. All rights reserved. This site is protected under copyright laws. Please do not use the iZook.com name or reprint any articles from this site without written permission. Copyright © 1998-2007, iZook. All rights reserved.

Disclaimer: The fabrication, modifications and designs you see on this web site are completed by our readers and submitted to us for publishing. If you duplicate these modifications you do so at your own risk. We do not endorse or make any claims to their safety, performance, On-road or off-road worthiness except as noted in our "Product Reviews". These reviews are on items purchased from or provided by reputable aftermarket suppliers. Please see our legal information page for details. Suzuki, Samurai, Sidekick, Vitara, Grand Vitara, X-90, and the Suzuki "S" Logo are all registered trademarks of American Suzuki Motor Corporation. Geo, Chevy, and Tracker are all registered trademarks of General Motors Corporation. iZook is in no way endorsed by or affiliated with American Suzuki Motor Corporation.

		The Trail Tough Rock Block with Bill Johnston You want to go really slow in the rocks, but you don't want to lose the ability to drive on the highway. You like the idea of additional transfer case, but you don't want to lengthen your drive train which will shorten your rear drive shaft. Yada yada yada... what a dilemma. Trail Tough has just started shipping their new 'Rock Block', an intermediate gear reduction box that replaces the short drive shaft between the transmission and the transfer case. This installation took a couple of hours to do, but that included straightening a couple bashed parts and stopping to take pictures, so 'your mileage may vary'.
		The Rock Block comes with a unique cross member that replace the regular rear transmission mount and makes the room needed to mount the new reduction box. It holds the transmission and the Rock Block with 'captured' rubber mounts that absorb vibrations like the stock tranny mount. The mounting yoke in the top-right of the photo on the right will be mounted to the transmission where the old mount normally would be.
		We started by removing the intermediate drive shaft (jack shaft) and the stock rear transmission mount.
		Next we removed the front mount for the long transfer case arm. Taking a closer look at the condition of the crossmember showed that it had seen its share of rock bashing. This had deformed the 'channel' that will be used to cradle the new crossmember. We had to straighten this piece out with the help of 'Mr. Sledge' and a good pair of vicegrips.
		Here you can see how the new crossmember fits nicely into the newly reformed channel in the old crossmember. In the picture on the left, you can see the mounting holes for the passenger side of the crossmember. The hole on the right is where the front mount for the transfer case goes. We temporarily replaced the rubber mount to secure the new crossmember while we prepared to drill the new mounting bolt holes.