Click Here To Visit
Click Here To Visit

Click through for a closer look...Click through for a closer look...The needle bearings should slide easily with no obstructions. And don't forget the circlips as you go.
Click through for a closer look...Click through for a closer look...Remember the input shaft we set aside earlier? You will need to replace the bearing on the end of the input shaft. Use a bearing puller for removal and then press the new bearing into its place. Then slide the input shaft back onto the main shaft over the new needle bearing.
Click through for a closer look...Click through for a closer look...As you carefully place the main/input shaft back into place, be sure to notice the circlips on the main bearings. These ride in a slot that will keep the bearing race from moving after assembly. Make sure everything rotates smoothly.
Click through for a closer look...Click through for a closer look...Bolt the upper case back into place and torque to factory specs. Put the idle gear/ reverse gear shaft back into place.

07/24/10 08:20:05

Looking for more exposure at your web site? We are  looking for contributing authors. Any article you provide will  be linked back to your site from the iZook web site with a full size banner at the top of your article.  This site  can only stay cutting edge with your input. E - mail me for details.  You can link to iZook with a new link button. Make sure to let us know if you use this button so a return link can be posted on the iZook links page.

Select this link for the Table Of Contents

Email Editor in Chief  Email Me!

iZook.com is Trademarked 1998-2007, iZook. All rights reserved.  This site is protected under copyright laws. Please do not use the iZook.com name or reprint any articles from this site without written permission. Copyright © 1998-2007, iZook. All rights reserved. 

Disclaimer: The fabrication, modifications and designs you see on this web site are completed by our readers and submitted to us for publishing.  If you duplicate these modifications you do so at your own risk. We do not endorse or make any claims to their safety, performance, On-road or off-road worthiness except as noted in our "Product Reviews". These reviews are on items purchased from or provided by reputable aftermarket suppliers.   Please see our legal information page for details. Suzuki, Samurai, Sidekick, Vitara, Grand Vitara, X-90, and the Suzuki "S" Logo are all registered trademarks of American Suzuki Motor Corporation. Geo, Chevy, and Tracker are all registered trademarks of General Motors Corporation. iZook is in no way endorsed by or affiliated with American Suzuki Motor Corporation.