Rotary Power

Home

 

Up Wrenchin' with IZook
with (TD) Troy Graham

Rotary Engine Install: Part 1, Page 5

The shifter base sits at the very rear of the tranny, so I had to do a little creative work with a sheet metal nibbler. However, as close as it looks, everything still works, BARELY. To avoid any hassles, the transfer case shifter will have to be bent slightly:

And another view from the side:
You need to use the slip yoke from the RX-7, but I found a little suprise: Mazda started crimping in their u-joints sometime between 81 and 85, so I had to get a drive shaft at the junkyard even though the one that came out of my 85 was in great shape. The "crimped" in style shaft is at the top, and the style with the internal snap rings is at the bottom:

01/30/10 21:22

Looking for more exposure at your web site? We are  looking for contributing authors. Any article you provide will  be linked back to your site from the iZook web site with a full size banner at the top of your article.  This site  can only stay cutting edge with your input. E - mail me for details.  You can link to iZook with a new link button. Make sure to let us know if you use this button so a return link can be posted on the iZook links page.

Select this link for the Table Of Contents

Email Editor in Chief  Email Me!

iZook.com is Trademarked 1998-2007, iZook. All rights reserved.  This site is protected under copyright laws. Please do not use the iZook.com name or reprint any articles from this site without written permission. Copyright © 1998-2007, iZook. All rights reserved. 

Disclaimer: The fabrication, modifications and designs you see on this web site are completed by our readers and submitted to us for publishing.  If you duplicate these modifications you do so at your own risk. We do not endorse or make any claims to their safety, performance, On-road or off-road worthiness except as noted in our "Product Reviews". These reviews are on items purchased from or provided by reputable aftermarket suppliers.   Please see our legal information page for details. Suzuki, Samurai, Sidekick, Vitara, Grand Vitara, X-90, and the Suzuki "S" Logo are all registered trademarks of American Suzuki Motor Corporation. Geo, Chevy, and Tracker are all registered trademarks of General Motors Corporation. iZook is in no way endorsed by or affiliated with American Suzuki Motor Corporation.