Steering Knuckle

Home

Click for more from Roadless Gear...

Home
Up
Bumpstops
SkY-J
SkY-J Update
Bigger Better?
OTT Stage 1
OTT Stage 2
Rag Joint Eliminator
OTSS
Track Bar
2WD - 4WD
Panhard Bar
DIY Front Axle
Ford Axle
Diff Caps
Missing Link
NCO Panhard Kit
OME Springs
Custom Wheels
Revolver Conversion
RROR Bonz
RRO Towers
RROR Spoa
Skidplate
SPTRX Panhard Kit
Anti-Wrap Kit
Spring Reversal
Frame Extension
Steering Knuckle
Steering Linkage
Power Steering Kit
Tire Valves
The Wheel Deal
Missing Link
Zookology 101
with Brandy Owen
(Introduction by Murph, The Seasoned Rookie)

Steering Knuckle Rebuild

Friends, Rookies, Zookimen, Lend me your sockets…

Brandy OwenIn the past few issues you’ve met a young lady named Brandy. Like many of us, she shuddered at the thought of getting dirty for fun. Just one week prior to the writing of this article, Brandy said to me over a pizza, “You know, with all the driving back and forth to the office every day, I’m really lucky I’ve never had a flat tire or anything – I wouldn’t have any idea how to change it.”

As with most of our rookies, sometimes they underestimate their inner strength and abilities – So did Brandy. By simply watching me do the job once (learning from my mistakes) and reading the FSM before and during the job, she proved to us all that working on our Suzukis is not as intimidating as it may seem.

After some zany off-roading trips, Murphy noticed that gear oil was beginning to leak from his driver's side steering knuckle. Having never replaced the seals or bearings in the Tonka Toy, it was decided that we'd play it safe and repair both sides. Murphy did the driver’s side first with me watching, then I did the passenger side.

As with most of our repair projects, we called Figmo at Roadless Gear and told him our problems. It was suggested that we go with the Front Knuckle Rebuild Kit and a set of front wheel bearings. This was very convenient and saved us a lot of time at the local parts-o-rama not having to look up parts, forget a key item, etc. The parts arrived within two days.

Now, I am going to take you through the process of a steering knuckle rebuild – not only as a rookie, but also as a stereotypical girly-girl doing this for the first time to show that YES – you can do it!

1. Start by gathering the things you will need: Steering knuckle kit, tools, (socket set, circlip remover, tie rod end removing tool, sealing compound, wheel bearing grease, a good penetrating oil like WD-40 or PB Blaster, Factory Shop Manual (available through www.roadlessgear.com,) icy cold beverages, and a good friend or two for moral support. And Music. You gotta jam as you work. We chose some of Murph's 80's CD's like the Motels and The HoneyDrippers.

2. Next, loosen the lug nuts and jack up your zook after making sure the rear wheels are properly blocked. (Trust me on this one...it doesn't work nearly as good if you do it the other way around!) 

3. Remove the wheel  

4. Now remove the brake caliper with carrier by loosening the carrier bolts. It's important not to let the caliper dangle from the brake line. Hang it up using a bungee cord to prevent the brake line from bending, twisting, or being pulled. 

Click through to the next page...

09/15/04 14:52

Looking for more exposure at your web site? We are  looking for contributing authors. Any article you provide will  be linked back to your site from the iZook web site with a full size banner at the top of your article.  This site  can only stay cutting edge with your input. E - mail me for details.  You can link to iZook with a new link button. Make sure to let us know if you use this button so a return link can be posted on the iZook links page.

Select this link for the Table Of Contents

Email Editor in Chief  Email Me!

iZook.com is Trademarked 1998-2007, iZook. All rights reserved.  This site is protected under copyright laws. Please do not use the iZook.com name or reprint any articles from this site without written permission. Copyright © 1998-2007, iZook. All rights reserved. 

Disclaimer: The fabrication, modifications and designs you see on this web site are completed by our readers and submitted to us for publishing.  If you duplicate these modifications you do so at your own risk. We do not endorse or make any claims to their safety, performance, On-road or off-road worthiness except as noted in our "Product Reviews". These reviews are on items purchased from or provided by reputable aftermarket suppliers.   Please see our legal information page for details. Suzuki, Samurai, Sidekick, Vitara, Grand Vitara, X-90, and the Suzuki "S" Logo are all registered trademarks of American Suzuki Motor Corporation. Geo, Chevy, and Tracker are all registered trademarks of General Motors Corporation. iZook is in no way endorsed by or affiliated with American Suzuki Motor Corporation.